feat(mail): deliver email one-time codes over SMTP and add the setup email screen

Felis never actually sent mail: OTP codes for onboarding, email login and
op-login were only written to the felis-api log behind a "demo has no SMTP"
limitation, and the Settings/SMTP flow those comments promised was never
built. Combined with the bootstrap Owner's address being recorded unverified
(87279a1), op-login start always took the anti-enumeration neutral branch and
minted a fake request_id, so the in-game approve inevitably answered "No
pending operator sign-in with that code".

Give the codes a real delivery path, configured in felis.toml rather than a
web settings page so config keeps a single source of truth:

- config: new [smtp] table (host, port defaulting to 587, from, username,
  password_ref). Validation requires a plausible from address and a sane
  port; the password itself never enters the config file.
- internal/mail (new): stdlib net/smtp mailer implementing the api.OTPMailer
  seam. Port 465 dials implicit TLS, other ports upgrade via STARTTLS when
  advertised; AUTH only when a username is configured (PlainAuth itself
  refuses plaintext, so the password cannot leak to a TLS-less relay).
  Ping() proves reachability and credentials without sending mail. The
  message shape (CRLF, Q-encoded bilingual subject) is pinned by test.
- platform: felis-smtp Secret constants and an optional FELIS_SMTP_PASSWORD
  env var on the felis-api Deployment, mirroring felis-uploads-s3.
- cmd/felis api: construct the real mailer when [smtp] is configured; keep
  the log fallback otherwise and say so at startup. Warn when a username is
  set but the credentials env is empty.
- setup TUI: "e" on the summary/status screen opens the email form (host,
  port, from, optional auth). Apply order: Ping preflight, [smtp] into both
  host and pod config files, felis-smtp Secret piped to kubectl via stdin,
  config Secret, felis-api rollout. A failed preflight leaves the install
  untouched. SMTP is deliberately not a wizard rail step: first-run stays
  mail-less by design, and the passkey minted at onboarding is the pre-SMTP
  owner credential.

Also make PGRepo.UserByEmail match case-insensitively (lower(email) =
lower($1)), honoring the interface contract and the users_verified_email_
unique partial index; the fake repo already matched with EqualFold.

Existing installs need the felis-api Deployment manifest re-applied (e.g. a
bootstrap re-run) before the new env var exists; a rollout restart alone
cannot add it.

cmd/felis/api.go

@@ -16,6 +16,7 @@ import (
 	"felis.lolicon.best/internal/backupjob"
 	"felis.lolicon.best/internal/build"
 	"felis.lolicon.best/internal/config"
+	"felis.lolicon.best/internal/mail"
 	"felis.lolicon.best/internal/panel"
 	"felis.lolicon.best/internal/passkey"
 	"felis.lolicon.best/internal/platform"
@@ -111,6 +112,31 @@ func cmdAPI(args []string, stdout, stderr io.Writer) int {
 		fmt.Fprintln(stderr, "felis api: warning: FELIS_SERVICE_TOKEN unset — internal face will reject all callers")
 	}
 
+	// Email one-time codes go through the [smtp] relay when one is configured; the
+	// password is read from the env var password_ref names (default SMTPPasswordEnv,
+	// injected from the felis-smtp Secret). No [smtp] host ⇒ mailer stays nil and
+	// deliverOTP logs each code server-side (the pre-SMTP bootstrap posture).
+	var mailer api.OTPMailer
+	if cfg.SMTP.Host != "" {
+		passRef := cfg.SMTP.PasswordRef
+		if passRef == "" {
+			passRef = platform.SMTPPasswordEnv
+		}
+		password := os.Getenv(passRef)
+		if cfg.SMTP.Username != "" && password == "" {
+			fmt.Fprintf(stderr, "felis api: warning: [smtp] username is set but credentials env %s is empty — OTP sends will fail AUTH\n", passRef)
+		}
+		mailer = &mail.SMTP{
+			Host:     cfg.SMTP.Host,
+			Port:     cfg.SMTP.Port,
+			From:     cfg.SMTP.From,
+			Username: cfg.SMTP.Username,
+			Password: password,
+		}
+	} else {
+		fmt.Fprintln(stderr, "felis api: [smtp] not configured — email one-time codes are logged, not mailed")
+	}
+
 	// Build subsystem (spec §16): the weak-SA build Job runs in the configured
 	// build namespace and pushes to the internal registry. The build Pod never
 	// holds DB credentials — felis-api owns the PG store and admits scanned
@@ -215,6 +241,7 @@ func cmdAPI(args []string, stdout, stderr io.Writer) int {
 		Restorer:    restorer,
 		Backuper:    backuper,
 		Submissions: submissions,
+		Mailer:      mailer,
 		// The external face is fronted by SessionAuth: it prefers a local session
 		// cookie (minted by the passwordless doors) and otherwise delegates to the
 		// Cloudflare-Access JWT verifier, so both auth models coexist on one face. The

cmd/felis/tui_root.go

@@ -313,6 +313,18 @@ func (m *rootModel) Update(msg tea.Msg) (tea.Model, tea.Cmd) {
 		m.stage = stageStorage
 		return m.adopt(newStorageChooserModel(m.rootDomain, method, prefill))
 
+	case reconfigureSMTPMsg:
+		// Configuring email after install: the wizard rail deliberately has no SMTP
+		// step (first-run is mail-less by design), so this is always a summary/status
+		// detour and returns there when done.
+		return m.adopt(newSMTPModel(currentSMTPInputs()))
+
+	case smtpResultMsg:
+		if m.result.alreadySetUp {
+			return m.showStatus()
+		}
+		return m.showSummary()
+
 	case goBackMsg:
 		m.stage = stageConnect
 		return m.adopt(newConnectChooserModel(m.rootDomain, m.adminHost, m.panelHost))

cmd/felis/tui_root_test.go

@@ -223,6 +223,32 @@ func TestRootReconfigureStorageReEntersChooser(t *testing.T) {
 	}
 }
 
+// TestRootReconfigureSMTP locks the post-install "configure email" path: from
+// the re-run status screen it opens the SMTP form, and finishing it lands back
+// on the status screen (not the first-run summary, which would drop the
+// alreadySetUp framing).
+func TestRootReconfigureSMTP(t *testing.T) {
+	m := newTestRoot(true, consoleModeSetup, "")
+	m = drive(t, m, preflightDoneMsg{})
+	if _, ok := m.screen.(*summaryModel); !ok {
+		t.Fatalf("re-run after preflight, screen = %T, want *summaryModel", m.screen)
+	}
+
+	m = drive(t, m, reconfigureSMTPMsg{})
+	if _, ok := m.screen.(*smtpModel); !ok {
+		t.Fatalf("reconfigure-smtp screen = %T, want *smtpModel", m.screen)
+	}
+
+	m = drive(t, m, smtpResultMsg{configured: true, detail: "smtp.example.net:587  ·  from [email protected]"})
+	sum, ok := m.screen.(*summaryModel)
+	if !ok {
+		t.Fatalf("after reconfigure-smtp, screen = %T, want *summaryModel", m.screen)
+	}
+	if !sum.alreadySetUp {
+		t.Fatalf("after reconfigure-smtp, summary should still be the alreadySetUp status screen")
+	}
+}
+
 func TestRootRerunLandsOnStatus(t *testing.T) {
 	// adminExists at start of a setup run = re-run: preflight should skip straight
 	// to the "manage in panel" status screen, never touching owner/connect.

cmd/felis/tui_smtp.go

@@ -0,0 +1,353 @@
+package main
+
+import (
+	"context"
+	"errors"
+	"fmt"
+	"strconv"
+	"strings"
+
+	"felis.lolicon.best/internal/config"
+	"felis.lolicon.best/internal/mail"
+	"felis.lolicon.best/internal/platform"
+
+	"github.com/charmbracelet/bubbles/spinner"
+	tea "github.com/charmbracelet/bubbletea"
+	"github.com/charmbracelet/huh"
+	corev1 "k8s.io/api/core/v1"
+	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
+	"sigs.k8s.io/yaml"
+)
+
+// ---- Email (SMTP) relay: the post-install "configure email" screen ----
+//
+// Bootstrap deliberately has no SMTP (the Owner's address is recorded
+// unverified and the passkey is the only pre-SMTP credential), so this screen
+// is where a deployment gains real mail: email verification, email-OTP login
+// and the op-login mailbox factor all start working once it applies. It is
+// reached from the summary/status screen ("e"), mirroring "change storage".
+
+// smtpInputs is the operator-entered relay coordinates. Only host/port/from/
+// username reach felis.toml; the password goes into the felis-smtp Secret.
+type smtpInputs struct {
+	host     string
+	port     string
+	from     string
+	username string
+	password string
+}
+
+// reconfigureSMTPMsg is sent from the summary/status screen to open the email
+// relay form — the supported way to configure or fix SMTP after install,
+// without hand-editing felis.toml and the Secret.
+type reconfigureSMTPMsg struct{}
+
+// smtpResultMsg returns control to the root once the screen is done: applied
+// (configured=true, with a recap) or backed out of (configured=false).
+type smtpResultMsg struct {
+	configured bool
+	detail     string
+}
+
+type smtpStep int
+
+const (
+	esForm smtpStep = iota
+	esWorking
+	esDone
+	esError
+)
+
+type smtpApplyMsg struct{ err error }
+
+// smtpModel drives the email relay form: collect → verify+apply → done/error,
+// the storageModel machine with a single form and no chooser.
+type smtpModel struct {
+	step smtpStep
+	form *huh.Form
+	sp   spinner.Model
+	err  error
+	in   smtpInputs
+
+	width, height int
+}
+
+func newSMTPModel(in smtpInputs) *smtpModel {
+	sp := spinner.New()
+	sp.Spinner = spinner.Dot
+	sp.Style = tuiLabel
+
+	if in.port == "" {
+		in.port = "587"
+	}
+	m := &smtpModel{step: esForm, sp: sp, in: in}
+	m.form = m.build()
+	return m
+}
+
+func (m *smtpModel) build() *huh.Form {
+	return m.sized(newFelisForm(huh.NewGroup(
+		huh.NewNote().
+			Title("Email (SMTP)").
+			Description("The relay Felis mails one-time codes through — email verification, email login and operator sign-in all need it. The password goes into a Kubernetes Secret; only the other fields are written to felis.toml."),
+		huh.NewInput().
+			Title("SMTP host").
+			Description("Your provider's relay, e.g. smtp.gmail.com or smtp.mailgun.org.").
+			Value(&m.in.host).
+			Validate(requiredStorageField("SMTP host")),
+		huh.NewInput().
+			Title("Port").
+			Description("587 = STARTTLS (most providers) · 465 = implicit TLS.").
+			Value(&m.in.port).
+			Validate(validateSMTPPort),
+		huh.NewInput().
+			Title("From address").
+			Description("The sender codes are mailed as, e.g. felis@your-domain.").
+			Value(&m.in.from).
+			Validate(validateSMTPFrom),
+		huh.NewInput().
+			Title("Username").
+			Description("Optional — leave blank for an unauthenticated relay.").
+			Value(&m.in.username),
+		huh.NewInput().
+			Title("Password").
+			Description("Required when a username is set.").
+			EchoMode(huh.EchoModePassword).
+			Value(&m.in.password),
+	)))
+}
+
+func (m *smtpModel) sized(f *huh.Form) *huh.Form {
+	if m.width > 0 {
+		return f.WithWidth(m.width).WithHeight(m.height)
+	}
+	return f
+}
+
+func (m *smtpModel) setSize(w, h int) {
+	m.width, m.height = w, h
+	if m.form != nil {
+		m.form = m.form.WithWidth(w).WithHeight(h)
+	}
+}
+
+func (m *smtpModel) Init() tea.Cmd { return m.form.Init() }
+
+func (m *smtpModel) Update(msg tea.Msg) (tea.Model, tea.Cmd) {
+	switch msg := msg.(type) {
+	case smtpApplyMsg:
+		if msg.err != nil {
+			m.step, m.err = esError, msg.err
+			return m, nil
+		}
+		m.step = esDone
+		return m, nil
+
+	case spinner.TickMsg:
+		if m.step == esWorking {
+			var cmd tea.Cmd
+			m.sp, cmd = m.sp.Update(msg)
+			return m, cmd
+		}
+		return m, nil
+
+	case tea.KeyMsg:
+		switch m.step {
+		case esForm:
+			switch msg.String() {
+			case "ctrl+c":
+				return m, tea.Quit
+			case "esc":
+				return m, smtpEmit(smtpResultMsg{})
+			}
+		case esDone:
+			switch msg.String() {
+			case "ctrl+c", "esc", "enter":
+				return m, smtpEmit(smtpResultMsg{configured: true, detail: smtpDetail(m.in)})
+			}
+			return m, nil
+		case esError:
+			switch msg.String() {
+			case "ctrl+c":
+				return m, tea.Quit
+			case "esc":
+				m.step, m.err = esForm, nil
+				m.form = m.build()
+				return m, m.form.Init()
+			case "enter":
+				m.step, m.err = esWorking, nil
+				return m, tea.Batch(m.sp.Tick, m.apply())
+			}
+			return m, nil
+		case esWorking:
+			if msg.String() == "ctrl+c" {
+				return m, tea.Quit
+			}
+			return m, nil
+		}
+	}
+
+	if m.step == esForm && m.form != nil {
+		form, cmd := m.form.Update(msg)
+		if f, ok := form.(*huh.Form); ok {
+			m.form = f
+		}
+		switch m.form.State {
+		case huh.StateCompleted:
+			m.normalizeInputs()
+			m.step = esWorking
+			return m, tea.Batch(m.sp.Tick, m.apply())
+		case huh.StateAborted:
+			return m, smtpEmit(smtpResultMsg{})
+		}
+		return m, cmd
+	}
+	return m, nil
+}
+
+func smtpEmit(msg smtpResultMsg) tea.Cmd { return func() tea.Msg { return msg } }
+
+func (m *smtpModel) apply() tea.Cmd {
+	in := m.in
+	return func() tea.Msg {
+		return smtpApplyMsg{err: applySMTPConfig(context.Background(), in)}
+	}
+}
+
+func (m *smtpModel) normalizeInputs() {
+	m.in.host = strings.TrimSpace(m.in.host)
+	m.in.port = strings.TrimSpace(m.in.port)
+	m.in.from = strings.TrimSpace(m.in.from)
+	m.in.username = strings.TrimSpace(m.in.username)
+	m.in.password = strings.TrimSpace(m.in.password)
+}
+
+func (m *smtpModel) View() string {
+	switch m.step {
+	case esWorking:
+		return "  " + m.sp.View() + " " + tuiHint.Render("Verifying the relay, saving email settings and rolling the API…") + "\n"
+	case esDone:
+		var b strings.Builder
+		b.WriteString(tuiSuccessBanner("Email configured — codes are now mailed.") + "\n\n")
+		b.WriteString(tuiInfo("Relay → "+smtpDetail(m.in)) + "\n")
+		b.WriteString("\n" + tuiAction("enter", "continue"))
+		return b.String()
+	case esError:
+		var b strings.Builder
+		b.WriteString(tuiErrorBanner("Could not configure email.") + "\n\n")
+		if m.err != nil {
+			b.WriteString(tuiHint.Render(m.err.Error()) + "\n")
+		}
+		b.WriteString("\n" + tuiAction("enter", "retry", "esc", "edit"))
+		return b.String()
+	default:
+		if m.form == nil {
+			return ""
+		}
+		return m.form.View()
+	}
+}
+
+// arrowNavOK yields the horizontal arrows to the rail except while the form is
+// taking text input (where ←/→ move the cursor).
+func (m *smtpModel) arrowNavOK() bool { return m.step != esForm }
+
+// smtpDetail is the one-line relay recap shown on the done screen.
+func smtpDetail(in smtpInputs) string {
+	return in.host + ":" + in.port + "  ·  from " + in.from
+}
+
+func validateSMTPPort(s string) error {
+	n, err := strconv.Atoi(strings.TrimSpace(s))
+	if err != nil || n < 1 || n > 65535 {
+		return errors.New("port must be a number 1-65535 (587 STARTTLS, 465 implicit TLS)")
+	}
+	return nil
+}
+
+func validateSMTPFrom(s string) error {
+	if !strings.Contains(strings.TrimSpace(s), "@") {
+		return errors.New("from must be the sender email address")
+	}
+	return nil
+}
+
+// currentSMTPInputs reads the relay already recorded in felis.toml so the form
+// pre-fills the non-secret fields. The password lives only in the felis-smtp
+// Secret and is deliberately never read back — it must be re-entered to change.
+// Any read error falls back to a blank form rather than blocking reconfig.
+func currentSMTPInputs() smtpInputs {
+	cfg, err := config.Load(hostSetupConfigPath)
+	if err != nil || cfg.SMTP.Host == "" {
+		return smtpInputs{}
+	}
+	return smtpInputs{
+		host:     cfg.SMTP.Host,
+		port:     strconv.Itoa(cfg.SMTP.Port),
+		from:     cfg.SMTP.From,
+		username: cfg.SMTP.Username,
+	}
+}
+
+// applySMTPConfig proves the relay works, then persists it and rolls felis-api:
+// Ping (connect/STARTTLS/AUTH, no mail sent) → [smtp] into both config files →
+// the felis-smtp Secret → the config Secret → rollout. A failed Ping leaves the
+// install untouched, so a typo dies at the keyboard, not at a player's OTP.
+func applySMTPConfig(ctx context.Context, in smtpInputs) error {
+	port, err := strconv.Atoi(in.port)
+	if err != nil {
+		return fmt.Errorf("port %q is not a number", in.port)
+	}
+	relay := &mail.SMTP{Host: in.host, Port: port, From: in.from, Username: in.username, Password: in.password}
+	if err := relay.Ping(ctx); err != nil {
+		return err
+	}
+
+	smtpCfg := config.SMTPConfig{
+		Host:        in.host,
+		Port:        port,
+		From:        in.from,
+		Username:    in.username,
+		PasswordRef: platform.SMTPPasswordEnv,
+	}
+	for _, path := range []string{hostSetupConfigPath, podSetupConfigPath} {
+		cfg, err := config.Load(path)
+		if err != nil {
+			return err
+		}
+		cfg.SMTP = smtpCfg
+		if err := writeConfig(path, cfg); err != nil {
+			return err
+		}
+	}
+	if err := applySMTPSecret(ctx, in.password); err != nil {
+		return err
+	}
+	if err := applyFelisConfigSecret(ctx); err != nil {
+		return err
+	}
+	if err := kubectl(ctx, "-n", "felis", "rollout", "restart", "deployment/felis-api"); err != nil {
+		return err
+	}
+	return kubectl(ctx, "-n", "felis", "rollout", "status", "deployment/felis-api", "--timeout=180s")
+}
+
+// applySMTPSecret creates (or replaces) the felis-smtp Secret the felis-api
+// Deployment injects the relay password from. Rendered in-process and piped to
+// `kubectl apply` — the password is never a command-line arg, so it never
+// appears in the host process table.
+func applySMTPSecret(ctx context.Context, password string) error {
+	secret := &corev1.Secret{
+		TypeMeta:   metav1.TypeMeta{APIVersion: "v1", Kind: "Secret"},
+		ObjectMeta: metav1.ObjectMeta{Name: platform.SMTPSecretName, Namespace: "felis"},
+		Type:       corev1.SecretTypeOpaque,
+		StringData: map[string]string{
+			platform.SMTPSecretPasswordKey: password,
+		},
+	}
+	manifest, err := yaml.Marshal(secret)
+	if err != nil {
+		return fmt.Errorf("render smtp secret: %w", err)
+	}
+	return kubectlWithInput(ctx, manifest, "apply", "-f", "-")
+}

cmd/felis/tui_summary.go

@@ -35,6 +35,8 @@ func (m *summaryModel) Update(msg tea.Msg) (tea.Model, tea.Cmd) {
 			return m, func() tea.Msg { return reconfigureConnectMsg{} }
 		case "s", "S":
 			return m, func() tea.Msg { return reconfigureStorageMsg{} }
+		case "e", "E":
+			return m, func() tea.Msg { return reconfigureSMTPMsg{} }
 		case "ctrl+c", "esc", "enter", "q":
 			return m, tea.Quit
 		}
@@ -78,6 +80,6 @@ func (m *summaryModel) View() string {
 		b.WriteString(tuiHint.Render("  The local certificate is self-signed; your browser may warn on first visit.") + "\n")
 	}
 
-	b.WriteString("\n" + tuiAction("c", "change connection", "s", "change storage", "enter/esc", "exit"))
+	b.WriteString("\n" + tuiAction("c", "change connection", "s", "change storage", "e", "configure email", "enter/esc", "exit"))
 	return b.String()
 }